News

  • 1
  • 2
  • 3
  • 4
Super Electrosafe PDF Print E-mail
Super_Electrosafe
Super Electrosafe is a high dielectric strength ready-to-use solvent, designed to replace 1,1,1-T, CFC's and chlorinated solvents.
Super Electrosafe is recommended for cleaning electric motors and other electrical equipment, and for the rapid removal of grease, oil, solvent base inks and wax.
• High dielectric strength
• High flash point
• Non-corrosive
• 100% volatile - no residue
• Odorless

Aerospace Equipment:
• Meets immersion corrosion requirements of MIL-C-87937A and MIL-85704.
• Meets stress corrosion of AMS 4911 and AMS 496 Titanium as per ASTM F945.
• Passes Hydrogen Embrittlement of Type 1C as per ASTM F519.
• Safe on painted surfaces - ASTM F502 per MIL-C-85704

Available in 5 litre can
Where to use Recommended for removing oils, greases, solid animal and vegetable fats and oils from electrical equipments (motors and aerospace equipment).
How to use Ready to use solvent. Do not dilute.
High dielectric strength for electrical and electronic cleaning. Recommended for general degreasing in dip tank, wipe on/wipe off, or by coarse spray. For more rapid drying time, apply forced air with a blow-off nozzle which makes forced air drying even more efficient.
Do not mix or rinse with water.
Safety instructions
It should not be consumed or allowed to come in contact with eyes. Use goggles and hand gloves while handling the concentrate and during the dilution process. Use local exhaust ventilation as needed if spill occur.

FOR HANDLING AND PRECAUTIONARY INFORMATION, REFER THE PRODUCT LABEL AND MATERIAL SAFETY DATA SHEET.