News

  • 1
  • 2
  • 3
  • 4
Enhancer PDF Print E-mail

Enviro_Care_Enhancer





Enhancer is an environmentally preferable high dilution, floor maintenance product that can be used in multi-methods to maintain or restore damaged and dulled acrylic-based floor coatings to a deep vibrant gloss.

Available in 5 litre can
Where to use On all types of carpet. Safe to use on stain resistant carpets.
Where not to use Do not use on asphalt tiles.
How to use Dilute 1:8 for light build-up and 1:3 for heavy build-up with water.

Directions for Use
1. Dilute ENVIRO CARE Floor Stripper 16 oz. to 42 oz. per gallon of water used, depending upon the amount of floor finish build-up to be removed.
2. Mop the Floor Finish Remover solution onto the floor. Note: Best results are obtained by working in small sections (100 sq. ft.) at a time.
3. Allow Floor Finish Remover to penetrate for 5 minutes.
4. Scrub the area using a floor machine equipped with a suitable stripping pad.
5. Pick up the solution with a wet vacuum or mop and bucket.
6. Rinse thoroughly. Allow the floor to dry completely and apply ENVIRO CARE Floor Finish.

Safety instructions
It should not be consumed or allowed to come in contact with eyes. Use goggles and hand gloves while handling the concentrate and during the dilution process. Use local exhaust ventilation as needed if spill occur.
As with any stripping operation, use extreme caution when walking on the floor while the stripper is working, as the emulsified floor finishes can become very slippery.
NOTE: Do not leave in contact with flooring substrates longer than 5-minute intervals as tile integrity and/or coloring may be severely or permanently damaged.

FOR HANDLING AND PRECAUTIONARY INFORMATION, REFER THE PRODUCT LABEL AND MATERIAL SAFETY DATA SHEET.