News

  • 1
  • 2
  • 3
  • 4
Ultrastrip PDF Print E-mail

Ultra_Strip


Ultra Strip is a heavy duty floor finish remover designed to combine stripping power and user friendly technology. This non-ammonionated stripper will easily remove the toughest strippable coatings including urethane fortified, heavily coated, and propane burnished floors.

Available in 5 litre can
Where to use Recommended for use on surfaces previously coated with permanent seals..
How to use Do not use undiluted. Test on a small area to de¬ter mine proper dilution and chemical action time required. Do not allow the stripping solution to dry or stand more than 5 minutes on the floor.
1. Apply Ultra Strip solution liberally with mop or automatic scrubber, using hot water.
2. Allow 3 to 5 minutes chemical action time.
3. Agitate solution with floor machine or auto¬matic scrubber.
4. Pick up the emulsified finish with a wet vacuum or automatic scrubber.
5. Rinse with a solution of Thermo Clean and cool water.
6. Check that the floor is neutralized (neutralize, if necessary)
7. Allow to dry thoroughly before recoating.
Safety instructions
It should not be consumed or allowed to come in contact with eyes. Use goggles and hand gloves while handling the concentrate and during the dilution process. Use local exhaust ventilation as needed if spill occur.
FOR HANDLING AND PRECAUTIONARY INFORMATION, REFER THE PRODUCT LABEL AND MATERIAL SAFETY DATA SHEET.
pH Alkaline