News

  • 1
  • 2
  • 3
  • 4
Conseal PDF Print E-mail
Enviro_Care_Conseal



Concrete Conseal Stone Protective Coating is a semi-permanent water-based coating. It protects and beautifies both decorative as well as functional floors. Whether your traffic is light, moderate or heavy, Conseal is the product of choice. Simply apply according to directions. Your area is ready for use in as little as 4 hours, with no fumes and no special respiratory equipment needed.

Available in 5 litre and 20 litre cans
Where to use On floors (applied to surfaces previously coated with permanent seals.)
How to use Do not dilute.
Apply Conseal with a lambs-wool applicator, low pressure, airless sprayer or power sprayer (recommended 40 psi). Allow to dry a minimum of 60 minutes. Longer drying times may be necessary under high humidity conditions. After drying, apply additional coats until the level of desired gloss and protection is achieved.
The surface to be coated with Conseal must be free of grease, oil and other soil to insure proper bonding. Scrub with Tough Job Cleaner, rinse and allow to dry.
Do not apply product if flooring and/or ambient temperatures are less than 55°F (13°C)
Safety instructions
Safe to handle. It should not be consumed or allowed to come in contact with eyes or skin. Use Goggles and gloves while cleaning.
Shelf life

The product will remain stable for 1 year at ambient temperatures.

pH Neutral