Products by Usage


  • 1
  • 2
  • 3
  • 4
  • 5
Floor Finish PDF Print E-mail

Floor Finish creates a new standard in floor finishing by combining an unequaled level of environmental preference with performance, which surpasses conventional floor finish technology.
Floor Finish contains no heavy metals, alkylphenol ethoxylates (APE's), phthalates, styrene, formaldehyde, polymers or urethane.

Floor Finish excels with all maintenance systems: scrub and recoat, spray buff or burnish. You'll get a tough, black-mark resistant shine with no powdering. No sealer is required, even after heavy stripping.

Available in 5 litre and 20 litre cans
Where to use On floors (applied to surfaces previously coated with permanent seals.)
How to use

Do not dilute.
Do not apply product if flooring or ambient temperatures are less than

13° C.
1. No base coat sealer is required. Build an adequate base for ease of maintenance with the desired floor care system by applying three (3) uniform coats of Floor Finish. Allow adequate drying time between coats, typically 75°F (24°C) and 50% relative humidity requires an average of 30-45 minutes. Adjust drying times according to specific application conditions.
2. For added depth of gloss and protection, additional two (2) or three (3) coats may be applied after the previous coat has dried to the touch – typically 30-45 minutes.
3. Burnishing or buffing between coats may produce added coating clarity.

Safety instructions
Safe to handle. It should not be consumed or allowed to come in contact with eyes or skin. Use Goggles and gloves while cleaning.
Shelf life

The product will remain stable for 1 year at ambient temperatures.

pH Neutral