SPEEDY
Coloured microfiber, polyester backing, looped yarn, with flaps 2 holes
Mainly used for wet mopping of medium/high dirty floors (in hotels, houses, offices, hospitals, etc)
Suggested for the cleaning of corners and vertical walls with frame art. 00008116AB.
It is suggested for the cleaning of ceilings thanks to the use of frame art. 00008316AB
Suggested for the cleaning of corners and vertical walls with frame art. 00008116AB.
It is suggested for the cleaning of ceilings thanks to the use of frame art. 00008316AB
- Thanks to its structure, microfibre multiplies the amount of yarns, which come in contact with the floor. Consequently the capacity to pick up dirt is much more higher than normal systems
- Latex-free product
- Made in Italy with solar energy
Ideal for any surface (especially the porous one) with a medium-high dirt level
Yarn: 80% polyester, 20% polyamide – decitex = 0,579
Support: polyester
Flaps: polyurethane
Support: polyester
Flaps: polyurethane
SUGGESTED washing temperature max 55/60° C with normal detergent for textiles (always follow the chemical manufacturer’s information)
Washing temperature: max 90°C (+/- 5°C) ONLY WITH WATER
Normal rinse cycle
Normal tumble dry (under 900 rpm)
Mechanical drying at low temperature
Washing temperature: max 90°C (+/- 5°C) ONLY WITH WATER
Normal rinse cycle
Normal tumble dry (under 900 rpm)
Mechanical drying at low temperature
Follow carefully the washing instructions and warnings on the detergent packaging (temperature and dosing) before washing
Pre-wash cycle in cold water to remove any residue of the used product
Do not use softener
Do not use chlorine or bleach
Use alkaline detergents with Ph < 11
We suggest to use the specific net bags for the mop washing
Pre-wash cycle in cold water to remove any residue of the used product
Do not use softener
Do not use chlorine or bleach
Use alkaline detergents with Ph < 11
We suggest to use the specific net bags for the mop washing
Over 250 washing cycles, if all washing instructions and warnings are observed
